PORSCHE CAYMAN S REAR SIGN
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
Sport rear silencer car1ss for Porsche 911 g-models
New version with detachable inlet flange and tailpipe. Allows easier, much accurate fitting and better alignment of tailpipe in rear valance cutout.
Reduced exhaust back pressure creates more power (+10kw / 14ps) and additional torque (15nm). Further evidence of improvements made, are recognised through an enhanced acoustic and weight reduction.
Features:
Stainless steel sport rear silencer with adjustable lh/rh tailpipes
General Fitment 930 1975-77
$1,626.08
Make a selection
"brombacher" titanium exhausts are the absolute last word in exhausts for the 997 GT2.
Incredible performance and aggressive sound all in a lightweight titanium system. The system as shown increases performance 25hp and weighs just 25.5 lbs for a huge weight savings in the already heavy rear of the 911.
From the turbo flanges and catalytics (available in 100 or 200 cells), to the tailpipes (Ø 2x85mm), this entire exhaust system (excluding the cells themselves) is made entirely of titanium. The 4 chamber system design reduces the drone in the cabin while retaining a deep, throaty growl unlike other 2 chamber systems from the competition. Our system is designed using the most expensive and highest heat v...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$12,395.90
Make a selection
Sport rear silencer car1ss for Porsche 911 g-models
New version with detachable inlet flange and tailpipe. Allows easier, much accurate fitting and better alignment of tailpipe in rear valance cutout.
Reduced exhaust back pressure creates more power (+10kw / 14ps) and additional torque (15nm). Further evidence of improvements made, are recognised through an enhanced acoustic and weight reduction.
Features:
Stainless steel sport rear silencer with adjustable lh
General Fitment 930 1975-77
$1,150.88
Make a selection
Sport rear silencer car1ss for Porsche 911 g-models
New version with detachable inlet flange and tailpipe. Allows easier, much accurate fitting and better alignment of tailpipe in rear valance cutout.
Reduced exhaust back pressure creates more power (+10kw / 14ps) and additional torque (15nm). Further evidence of improvements made, are recognised through an enhanced acoustic and weight reduction.
Features:
Stainless steel sport rear silencer with adjustable lh/rh tailpipes
General Fitment 930 1975-77
$1,477.58
Make a selection
Complete 4-corner coil-over kit includes choice of spring rates and additional mounting hardware. this kit is designed to be used with the existing OEM mounts. Kit will include front and rear bilstein escort cup height adjustable struts and shocks. Included hardware: 2.5" hypercoil springs for front, 2.25" hypercoil springs for rear, spring perches.
General Fitment 944 1982-85 944 1985-88 944 1989-91 968 1992-95
$3,310.00
Make a selection
Sport rear silencer sets for - Porsche 993 Carrera 3.6l; Porsche 993 Carrera rs 3.8l; Porsche 993 cup.
. These sport rear silencers have been developed and tested to the highest standard on the dyno. They are designed as absorptive silencers which reduce exhaust back pressure drastically. The result is beside more power and torque a better response characteristic.
Further evidence of improvements made, are recognised through an enhanced accoustic and weight reduction.
Strenghtened brakets as well as the olive- and slide system ensure an exact adjustment, which guarantees a stressless installation.
New modular design with the possibility of interchanging components. Developed for maximum ...(choose a part on the right to read more)
General Fitment 911 1994-98
Sport rear silencer sets for - Porsche 993 Carrera 3.6l; Porsche 993 Carrera rs 3.8l; Porsche 993 cup.
. These sport rear silencers have been developed and tested to the highest standard on the dyno. They are designed as absorptive silencers which reduce exhaust back pressure drastically. The result is beside more power and torque a better response characteristic.
Further evidence of improvements made, are recognised through an enhanced accoustic and weight reduction.
Strenghtened brakets as well as the olive- and slide system ensure an exact adjustment, which guarantees a stressless installation.
New modular design with the possibility of interchanging components. Developed for maximum ...(choose a part on the right to read more)
General Fitment 911 1994-98
Sport rear silencer sets for - Porsche 993 Carrera 3.6l; Porsche 993 Carrera rs 3.8l; Porsche 993 cup.
. These sport rear silencers have been developed and tested to the highest standard on the dyno. They are designed as absorptive silencers which reduce exhaust back pressure drastically. The result is beside more power and torque a better response characteristic.
Further evidence of improvements made, are recognised through an enhanced accoustic and weight reduction.
Strenghtened brakets as well as the olive- and slide system ensure an exact adjustment, which guarantees a stressless installation.
New modular design with the possibility of interchanging components. Developed for maximum ...(choose a part on the right to read more)
General Fitment 911 1994-98
Sport rear silencer sets for - Porsche 993 Carrera 3.6l; Porsche 993 Carrera rs 3.8l; Porsche 993 cup.
. These sport rear silencers have been developed and tested to the highest standard on the dyno. They are designed as absorptive silencers which reduce exhaust back pressure drastically. The result is beside more power and torque a better response characteristic.
Further evidence of improvements made, are recognised through an enhanced accoustic and weight reduction.
Strenghtened brakets as well as the olive- and slide system ensure an exact adjustment, which guarantees a stressless installation.
New modular design with the possibility of interchanging components. Developed for maximum ...(choose a part on the right to read more)
General Fitment 911 1994-98
Sport rear silencer sets for - Porsche 993 Carrera 3.6l; Porsche 993 Carrera rs 3.8l; Porsche 993 cup.
. These sport rear silencers have been developed and tested to the highest standard on the dyno. They are designed as absorptive silencers which reduce exhaust back pressure drastically. The result is beside more power and torque a better response characteristic.
Further evidence of improvements made, are recognised through an enhanced accoustic and weight reduction.
Strenghtened brakets as well as the olive- and slide system ensure an exact adjustment, which guarantees a stressless installation.
New modular design with the possibility of interchanging components. Developed for maximum ...(choose a part on the right to read more)
General Fitment 911 1994-98
Cargraphics flow optimized sport catalysers, are available for your original rear silencer. Unrestricted obd2 compatibility because of the special trimetal coating they receive. The catalyser creates 7kw (10ps) more power and 10nm additional torque. Further evidence of the improvements made, are recognized through enhanced acoustics and a significant weight reduction.
Includes: 2 x tri-metal 130mm big volume 200 cell high flow catalysers
Please note, all images are for representation only, the actual item may vary.
General Fitment 911 1998-05
$2,517.08
Make a selection
Cargraphic;s flow optimized sport catalysers, are available for your original rear silencer. Unrestricted obd2 compatibility because of the special trimetal coating they receive. The catalyser creates 5kw (7ps) more horsepower and 10nm additional torque. Further evidence of the improvements made, are recognized through enhanced acoustics and a significant weight reduction.
General Fitment 911 GT3 2003-05
$2,368.58
Make a selection
Sport rear silencer car1ss for Porsche 911 g-models
New version with detachable inlet flange and tailpipe. Allows easier, much accurate fitting and better alignment of tailpipe in rear valance cutout.
Reduced exhaust back pressure creates more power (+10kw / 14ps) and additional torque (15nm). Further evidence of improvements made, are recognised through an enhanced acoustic and weight reduction.
Features:
Stainless steel sport rear silencer with adjustable lh
General Fitment 930 1975-77
$1,180.58
Make a selection
Cargraphic;s flow optimized sport catalysers, are available for your original rear silencer. Unrestricted obd2 compatibility because of the special trimetal coating they receive. The catalyser creates 16kw (21ps) more horsepower and 25nm additional torque. Further evidence of the improvements made, are recognized through enhanced acoustics and a significant weight reduction.
General Fitment 911 TURBO/GT2 2010-13
$3,408.08
Make a selection
Ksport version rr damper system is built specifically for road racing only. Aggressive rates and valving are chosen for maximum handling and performance with acute reaction and responsiveness. Integrated with 36 levels of dampening adjustment, simultaneous compression and rebound adjustment, lightweight aluminum mounts, and pillow ball upper mounts on some applications. (race use only.)
36 levels of dampening adjustment allow you to fine tune the ride to your handling and comfort needs. The dampening adjusts compression and rebound simultaneously for ease of adjustment. Pillow ball top mounts in the front and rear on some applications allow you to maintain vehicle manufacturer suspension geometry design....(choose a part on the right to read more)
General Fitment 911 1998-05
$2,732.40
Make a selection
Long, filigrane spokes and a special small centerpiece give the design of the ch-r its at the same time timeless and dynamic look. The dual execution of the ch-r ii combines in an optimal way, its direct form, for the bestseller with the most modern technology in the motorsport industry. Two-part wheel. Laser marking motorsport in the center of the wheel. Exchengeable stainless steel-side guards. Weight optimization through the rear spokes.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
$1,381.60
Make a selection
Ksport version rr damper system is built specifically for road racing only. Aggressive rates and valving are chosen for maximum handling and performance with acute reaction and responsiveness. Integrated with 36 levels of dampening adjustment, simultaneous compression and rebound adjustment, lightweight aluminum mounts, and pillow ball upper mounts on some applications. (race use only.)
36 levels of dampening adjustment allow you to fine tune the ride to your handling and comfort needs. The dampening adjusts compression and rebound simultaneously for ease of adjustment. Pillow ball top mounts in the front and rear on some applications allow you to maintain vehicle manufacturer suspension geometry design....(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$2,732.40
Make a selection
Each gruppem aerodynamic component is hand made from the highest grade carbon fiber and kevlar composites. Aerodynamic elements can not only be visually appealing but also improve performance. With more downforce the tires will have more grip through the corners, as well as under braking. Additionally, our components are lighter than their stock counterparts, so overall power-to-weight ratio is improved as well.
Gruppem has poured an enormous amount of research data, testing, and air flow management experience into developing an aero component product line with absolutely no compromise. Every gruppem aerodynamic component is designed to match the make and model for each application, maximizing downforce, ...(choose a part on the right to read more)
General Fitment 911 1998-05
$5,408.24
Make a selection
Each gruppem aerodynamic component is hand made from the highest grade carbon fiber and kevlar composites. Aerodynamic elements can not only be visually appealing but also improve performance. With more downforce the tires will have more grip through the corners, as well as under braking. Additionally, our components are lighter than their stock counterparts, so overall power-to-weight ratio is improved as well.
Gruppem has poured an enormous amount of research data, testing, and air flow management experience into developing an aero component product line with absolutely no compromise. Every gruppem aerodynamic component is designed to match the make and model for each application, maximizing downforce, ...(choose a part on the right to read more)
General Fitment 911 1998-05
$5,021.93
Make a selection
Each gruppem aerodynamic component is hand made from the highest grade carbon fiber and kevlar composites. Aerodynamic elements can not only be visually appealing but also improve performance. With more downforce the tires will have more grip through the corners, as well as under braking. Additionally, our components are lighter than their stock counterparts, so overall power-to-weight ratio is improved as well.
Gruppem has poured an enormous amount of research data, testing, and air flow management experience into developing an aero component product line with absolutely no compromise. Every gruppem aerodynamic component is designed to match the make and model for each application, maximizing downforce, ...(choose a part on the right to read more)
General Fitment 911 1989-94
$5,021.93
Make a selection
B&b header 1 3/4 inch Porsche 944 turbo 85-89
Since 1989 billy boat performance exhaust has designed, tested, and manufactured the highest quality stainless steel exhaust systems available. Today in its state-of-the-art facility, billy boat continues to develop the highest performing exhaust systems for most sports cars, trucks, and suvs. With an in-house dyno facility and r&d staff, they stay on top of current vehicle trends and deliver products that fit and perform to an unsurpassed level of standards.
Features:
Makes 8hp to the rear wheels.
Features 4-2-1 design for optimal flow using 1 3/4 piping.
Completely stainless steel
Mandrel bending
Tig welding.
This product is made to o...(choose a part on the right to read more)
General Fitment 944 1985-88
$1,633.78
Make a selection
Seibon carbon, a division of seibon international, inc., specializes in the design and manufacture of high-quality carbon fiber automotive body components such as hoods, trunks, fenders, and aerodynamic body additions such as rear spoilers and side skirts.
Seibon carbon fiber front lip attaches to your factory bumper to add style and give the car a lower more aggressive look.
Today there are a lot of carbon fiber manufacturers to choose from for styling your car. These manufacturers offer you a wide range of similar looking products for varying prices. As a vehicle owner you want something that looks as good on your car as it does in the picture on the internet, right? That's why we have chosen sei...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$1,147.50
Make a selection
B&b exhaust muffler oval rolled tip Porsche 930 turbo 75-89
Billy boat performance exhaust continues to deliver unsurpassed quality in craftsmanship in its products, offering true hand built quality for your Porsche. This system is the reality of a turbo owners dream. B&bs complete turbo exhaust system all but eliminates notorious 930 turbo lag making this great machine noticeably more responsive.
Makes 12hp to the rear wheels. features a single 3 inch oval rolled edge tip. this completely stainless steel system features cnc machined billet hangers, mandrel bending, and tig welding.
1975 - 1979 requires additional wastegate pipe.
This unit is designed for off-highway racing only and ...(choose a part on the right to read more)
General Fitment 930 1975-77
$1,502.58
Make a selection
B&b exhaust muffler oval cut edge tip Porsche 930 turbo 75-89
Billy boat performance exhaust continues to deliver unsurpassed quality in craftsmanship in its products, offering true hand built quality for your Porsche. This system is the reality of a turbo owners dream. B&bs complete turbo exhaust system all but eliminates notorious 930 turbo lag making this great machine noticeably more responsive.
Makes 12hp to the rear wheels. features a single 3 inch oval cut edge tip. this completely stainless steel system features cnc machined billet hangers, mandrel bending, and tig welding.
1975 - 1979 requires additional wastegate pipe.
This unit is designed for off-highway racing only and s...(choose a part on the right to read more)
General Fitment 930 1975-77
$1,313.37
Make a selection
B&b exhaust muffler twin oval cut edge tips Porsche 930 turbo 75-89
Billy boat performance exhaust continues to deliver unsurpassed quality in craftsmanship in its products, offering true hand built quality for your Porsche. This system is the reality of a turbo owners dream. B&bs complete turbo exhaust system all but eliminates notorious 930 turbo lag making this great machine noticeably more responsive.
Makes 12hp to the rear wheels. features a twin 3 inch oval cut edge tips. this completely stainless steel system features cnc machined billet hangers, mandrel bending, and tig welding.
1975 - 1979 requires additional wastegate pipe.
This unit is designed for off-highway racing only ...(choose a part on the right to read more)
General Fitment 930 1975-77
$1,394.86
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|